Canon PIXMA MP800R User's Guide - Page 108

LAN settings For details on how to set LAN settings, refer to "Printing Out Network Setting Information" and "Initializing Network Settings" of "Printing and Initializing Network Settings" in the Setup Guide. „ Reset LAN settings Restores the machine's LAN settings to the factory default. „ Print LAN details Prints out the information of the machine's network settings. For details on the network setting information, refer to "Printing Out Network Setting Information" in the Network Guide. Important This printout contains valuable information about your computer. Handle it with care. Other Settings „ Date display Changes the display order for shooting dates to be printed. Note z When or is selected for in the tab 1 on the Settings (Memory Card) screen, the shooting date is printed in the date display order you selected. For Print settings, see "To Change Print Settings" on page 35. z The shooting date format is as specified in the DPOF setting from DPOF printing. „ Read/write attribute Selects whether to allow data to be written onto memory cards from a computer. You can select from or . Important If you set this setting to , card direct printing cannot be done. After you finish operation of the memory card dedicated drive, be sure to revert this setting to . „ Power save setting Specifies the time until Power saving is enabled. You can select from , , or . The initial value is set to . „ Adjust contrast Use this to adjust the contrast of the LCD if it is too low or too high. 106 Changing the Machine Settings Chapter 10