Canon PowerShot SX40 HS PowerShot SX40 HS Camera User Guide - Page 105
Adjusting the Flash Output
View all Canon PowerShot SX40 HS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Adjusting the Flash Output In D mode, you can choose 3 levels of flash output. Set the mode dial to D. Choose the flash output level. z After pressing the m button, press the op buttons to choose X. Complete the setting. z Press the qr buttons or turn the 5 dial to choose the flash output level, then press the m button. X Once set, X will appear on the screen. • You can also set the flash output level by pressing the n button to choose [Flash Control] (p. 99) in the 4 tab, then choose [Flash Output] and press the qr buttons to choose a setting. • In M and B modes, you can set the flash output level if you choose [Flash Control] in the 4 tab, then set [Flash Mode] to [Manual]. • If you hold down the h button for more than 1 second, the setting screen will appear. If you press the h button then immediately press the n button when the flash is raised, the setting screen will appear. 105