Canon XA20 Instruction Manual - Page 128
Selecting the recording program, Adjusting the exposure compensation value, Adjusting the white
View all Canon XA20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Remote Operation Via the Wi-Fi Remote Application Selecting the recording program 1 Press the recording program button. • The recording programs will appear. 2 Select the desired recording program. 128 Adjusting the exposure compensation value 1 Touch [y]. 2 Press the exposure compensation value button. • The exposure compensation screen will appear. 3 Select the desired exposure compensation value. • The selected value will be displayed on the Wi-Fi Remote screen and will be applied to the camcorder. Adjusting the white balance 1 Press the white balance mode button. • The white balance modes will appear. 2 Select the desired white balance mode. If you selected È: 3 Press the color temperature and then select the desired value from the list. • The selected value will be displayed on the Wi-Fi Remote screen and will be applied to the camcorder. If you selected Æ or Ç: 3 Point the camcorder at a white object so that it fills the whole screen. • Use the same lighting conditions you plan to use when recording. • Make sure the white object fills the screen until the procedure is completed. 4 Press [Å]. • If a custom white balance has not yet been stored, [Å] will flash slowly. • During the procedure, [Å] will flash quickly. When it stops flashing, the procedure is completed and the setting will be applied to the camcorder. Adjusting the aperture 1 Press the aperture button. • The available aperture values will appear. 2 Select the desired aperture value. • Alternatively, you can press IRIS [+] to open the aperture or IRIS [-] to close the aperture in 1/4-stop increments. (Onscreen displays will show the closest 1/3-stop aperture value.) • The selected value will be displayed on the Wi-Fi Remote screen and will be applied to the camcorder.