Canon XA20 Instruction Manual - Page 88
Activating the Microphone's Attenuator INPUT terminals
View all Canon XA20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Recording Audio 1 Open the desired INPUT terminal's sensitivity submenu. [FUNC.] > [MENU] > p > [INPUT 1 Mic Trimming] or [INPUT 2 Mic Trimming] 2 Touch the desired level and then touch [X]. • The available sensitivity levels are +12 dB, +6 dB, 0 dB, -6 dB and -12 dB. 88 Activating the Microphone's Attenuator (INPUT terminals) You can activate the microphone attenuator (20 dB) for microphones connected to the INPUT 1 and INPUT 2 terminals to prevent audio from being distorted if the audio level is too high. POINTS TO CHECK • Set the sensitivity switch of the desired INPUT terminal to MIC or MIC+48V. 1 Open the desired INPUT terminal's microphone attenuator submenu. [FUNC.] > [MENU] > p > [INPUT 1 Mic Att.] or [INPUT 2 Mic Att.] 2 Touch [i On] and then touch [X].