Canon XA20 Instruction Manual - Page 25
Using the Lens Hood and Lens Cap, Using the Viewfinder
View all Canon XA20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Preparing the Camcorder Using the Lens Hood and Lens Cap While recording, the supplied lens hood with lens barrier is effective for reducing stray light that can be the cause of lens flare and ghost images. Additionally, closing the lens barrier can help prevent fingerprints and dirt accumulation on the lens. Use the supplied lens cap when carrying the camcorder or storing it after use. * Note that the lens cap and the lens hood with lens barrier cannot 25 be used simultaneously. 1 Remove the lens cap. 2 Place the lens hood on the front of the lens so that the groove on the lens hood is aligned with the bottom of the lens (ቢ), and then turn the lens hood clockwise until it stops with a click (ባ). • Be careful not to deform the lens hood. • Make sure that the lens hood is aligned with the thread. • To remove the lens hood, turn it counterclockwise. Using the Viewfinder If it is difficult to use the OLED screen, you can use the viewfinder, which can be tilted 45 degrees upward. You can also use the viewfinder when you rotate the OLED panel 180 degrees to let the subject watch the recording. 1 Pull out the viewfinder. 2 Use the power switch to turn on the camcorder. 3 Adjust the viewfinder using the dioptric adjustment lever. • You can close the OLED panel or rotate it toward the subject as you prefer. • You can tilt the viewfinder 45 degrees upward. Dioptric adjustment lever