Canon XA20 Instruction Manual - Page 45
Recording in, Manual Mode - sd card used
View all Canon XA20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Recording Movies and Photos Recording in n (Manual) Mode When the mode switch is set to n (Manual), you can enjoy full access to the menus and manually adjust the exposure, focus, white balance and many more of the camcorder's settings to your preference. Even in mode, though, the camcorder can help you with the settings, for example, by using Special Scene recording programs (A 73). Operating modes: 45 1 Set the mode switch to n. 2 Set the power switch to CAMERA. 3 Record movies and photos. • The procedure is the same as in mode (A 41). IMPORTANT • Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss or damage to the memory card. - Do not open the double memory card slot cover. - Do not disconnect the power source or turn off the camcorder. - Do not change the camcorder's operating mode. • Be sure to save your recordings regularly (A 114), especially after making important recordings. Canon shall not be liable for any loss or corruption of data. NOTES • The START/STOP button on the handle unit has a lock lever to prevent accidental operation. Set the lock lever to C in cases such as when you do not want a recording inadvertently paused or do not plan to use this START/STOP button. Return the lever to its previous position to enable use of the START/STOP button again. • When you set the q > [Rec Command] setting to [i On] and you use the HD/SD-SDI terminal ( only) or HDMI terminal to connect the camcorder to a device capable of receiving recording commands through a connection via the HD/SD-SDI terminal ( only) or HDMI terminal, if you start or stop recording with the camcorder, the connected device will also start or stop recording.