Canon XA20 Instruction Manual - Page 164
When the recording mode is 28 Mbps LPCM 59.94P, 28 Mbps 59.94P or 35 Mbps 59.94P
View all Canon XA20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
Troubleshooting 164 Need to recover files from the memory card. Change the position of the LOCK switch on the memory card. - This message will appear the next time you turn on the camcorder if power supply was accidentally interrupted while the camcorder was writing on the memory card and later the position of the card's LOCK switch was changed to prevent erasure. Change the position of the LOCK switch. No memory card - Insert a compatible memory card into the camcorder (A 38). No photos - There are no photos to play back. No scenes - There are no scenes on the memory card selected. Not enough available space - Delete some recordings to free some space (A 103, 113). - Set the recording mode to 5 Mbps for AVCHD movies or 3 Mbps for MP4 movies. - The available space on the memory card is less than the size of the recordings you are trying to copy. Delete some recordings to free some space (A 103, 113) or reduce the number of recordings to copy. Number of scenes already at maximum - The number of scenes on the memory card has reached 3,999 (the maximum number of scenes for AVCHD movies). Delete some scenes (A 103) to free some space. Recording was stopped due to insufficient write speed of the memory card - The write speed of the memory card was too slow so recording was stopped. Replace the memory card with one rated SD Speed Class 4, 6 or 10. - When the recording mode is 28 Mbps LPCM (59.94P), 28 Mbps (59.94P) or 35 Mbps (59.94P), you must use a memory card rated SD Speed Class 6 or 10. - When recoding movies using slow & fast motion, you must use a memory card rated SD Speed Class 10. - After repeatedly recording, deleting and editing scenes (fragmented memory), it will take longer to write data on the memory card and recording may stop. Save your recordings (A 114) and initialize the memory card (A 38). Scene recorded using another device. Cannot copy the scene. Scene recorded using another device. Cannot divide the scene. - Scenes that were not recorded with this camcorder cannot be copied or divided with this camcorder. Some scenes could not be deleted - Movies that were protected/edited with other devices and then transferred to a memory card connected to the computer cannot be deleted with this camcorder. Some scenes were recorded using another device and cannot be copied. - Scenes that were not recorded with this camcorder cannot be copied. Task in progress. Do not disconnect the power source. - The camcorder is updating the memory card. Wait until the operation ends and do not disconnect the compact power adapter or remove the battery pack. This photo cannot be displayed - You may not be able to display photos taken with other devices or image files created or edited on a computer and then transferred to a memory card connected to the computer.