Compaq AP200 Reference Guide - Page 142
A DIMM module in DIMM, Single Bit ECC error. - ram
UPC - 743172868534
View all Compaq AP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
E-4 Error Codes Power-On Self-Test Messages Continued Message Beeps* Probable Cause 201-Memory Error None RAM failure. Recommended Action 1. Make sure your memory module(s) (if any) are installed properly. 2. Replace the memory module(s). 3. Replace system board. 203-Memory Address None Error RAM failure. 4. Make sure your memory module(s) (if any) are installed properly. 5. Replace the memory module(s). 6. Replace system board. 207-ECC Corrected 2S Single Bit Errors in DIMM/SIMM Pair(s) X, X, ... Single Bit ECC error. Replace DIMM if error persists. 213-Incompatible 2S DIMM Module in DIMM Socket(s) X, X, ... * L = Long, S = Short A DIMM module in DIMM socket identified in the error message is missing critical SPD information, or is incompatible with the chipset. Replace the DIMM with a module conforming to the SPD standard. See Chapter 4, "Hardware Upgrades." Continued