Compaq AP200 Reference Guide - Page 70
Changing from a Minitower to a Desktop Configuration
UPC - 743172868534
View all Compaq AP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
4-6 Hardware Upgrades Changing from a Minitower to a Desktop Configuration 1. Turn off the workstation and any external devices. Disconnect the power cord from the grounded AC outlet. Disconnect the network cable and any external devices from the system. 2. Remove the workstation access panel. 3. Remove the front bezel. 4. Disconnect all power and data cables from the drives in the 5.25-inch drive bays. 5. To release the drives from the 5.25-inch drive bay, press the long drivelock as shown. Figure 4-4. Releasing the drives with the drivelock 6. While pressing the drivelock, pull the drives out of the drive bay. 7. After placing the workstation in the desktop position, gently slide the drives into the bay.
4-6
Hardware Upgrades
Changing from a Minitower to a
Desktop Configuration
1.
Turn off the workstation and any external devices. Disconnect the
power cord from the grounded AC outlet. Disconnect the network
cable and any external devices from the system.
2.
Remove the workstation access panel.
3.
Remove the front bezel.
4.
Disconnect all power and data cables from the drives in the 5.25-inch
drive bays.
5.
To release the drives from the 5.25-inch drive bay, press the long
drivelock as shown.
Figure 4-4.
Releasing the drives with the drivelock
6.
While pressing the drivelock, pull the drives out of the drive bay.
7.
After placing the workstation in the desktop position, gently slide the
drives into the bay.