Compaq AP200 Reference Guide - Page 144
L = Long, S = Short, Cover Has Been
UPC - 743172868534
View all Compaq AP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
E-6 Error Codes Power-On Self-Test Messages Continued Message Beeps* Probable Cause 601-Diskette Controller None Error Diskette controller circuitry or floppy drive circuitry incorrect. Recommended Action 1. Run Setup. 2. Check and/or replace cables. 3. Replace diskette drive. 4. Replace the system board. 602-Diskette Boot None Record Error Diskette in drive A not bootable. Replace the diskette. 605-Diskette Drive 2S Type Error Mismatch in drive type. Run Computer Setup or Windows NT utilities. 610-External Storage None Drive Failure External tape drive not connected. Reinstall tape drive or press F1 and allow system to reconfigure without the drive. 611-Primary Floppy 2S Port Address Assignment Conflict Configuration error. Run Computer Setup or Windows NT utilities. 612-Secondary Floppy 2S Port Address Assignment Conflict Configuration error. Run Computer Setup or Windows NT utilities. 912-The Computer None Cover Has Been Removed Since Last System Start Up * L = Long, S = Short Continued