Compaq AP200 Reference Guide - Page 81
Upgrading Graphics Capabilities
UPC - 743172868534
View all Compaq AP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
4-17 9. Plug the network cable back into the system. Plug the power cord back into the grounded AC outlet and reconnect external devices. 10. Reconfigure the workstation, if necessary. See the "When to Reconfigure the Workstation" section in this chapter. Upgrading Graphics Capabilities CAUTION: Static electricity can damage the electronic components of the workstation or optional equipment. Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a grounded metal object. See Appendix B for more information. To upgrade graphics memory, follow the steps below: 1. Turn off the workstation and any external devices, then disconnect the power cord from the grounded AC outlet. Disconnect the network cable and any external devices from the system. IMPORTANT: On a power-managed system, the power cord MUST be disconnected from the grounded AC outlet. 2. Remove the workstation access panel. 3. Remove the screw that secures the AGP graphics board to the workstation chassis and remove the board from the AGP slot. Figure 4-13. Removing the Graphics Board from the AGP Slot Compaq Professional Workstation AP200 Reference Guide