Compaq AP200 Reference Guide - Page 83
Customizing the Monitor Display, Installing Additional Drives - fire panel installation manual
UPC - 743172868534
View all Compaq AP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
4-19 Customizing the Monitor Display If you choose to customize your monitor display, you can manually select or change the monitor brand, model, refresh rates, color, resolution, and power management settings. To customize the display using Windows NT Workstation 4.0, complete the following steps: 1. Click Start, then click Settings. 2. Click Control Panel, then double-click the Display icon. 3. Click the Settings tab. 4. In the Desktop Area box, drag the pointer to the desired resolution. 5. In the Color Palette box, select the number of colors you want to display. 6. Select List All Modes and choose a mode from the list of valid modes. Click OK for the changes to take effect. 7. Click Test to test the changes made to the display settings. 8. Click Yes if the test bitmap was properly displayed. 9. Click OK for the changes to take effect. Installing Additional Drives The workstation supports up to five drives which may be installed in various configurations. When installing additional IDE drives, follow these guidelines: s For optimal performance, connect hard drives to the primary controller. Connect expansion devices, such as IDE CD-ROM, tape, and diskette drives to the secondary controller. s You may install either a third-height or a half-height drive into a halfheight bay. Compaq Professional Workstation AP200 Reference Guide