Compaq AP200 Reference Guide - Page 75
Installing Additional Memory, Internal Components, IMPORTANT, CAUTION - power supply
UPC - 743172868534
View all Compaq AP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Internal Components Continued Identifier 8 NIC controller in PCI slot Component 9 SCSI controller in PCI slot (on select models) : AGP slot ; Processor < Power supply 4-11 Installing Additional Memory The workstation comes with at least 64 megabytes of Error Checking and Correcting (ECC ) unregistered, synchronous dynamic random access memory (SDRAM) dual inline memory modules (DIMMs) installed and supports up to 384 MB of memory. The memory sockets on the system board can be populated with 16-, 32-, 64-, or 128-MB DIMMs. For proper system operation, the DIMMs must be industry standard 168-pin, 100-MHz or faster unbuffered SDRAM DIMMs. The SDRAM DIMMs must support CAS Latency 2 or 3 (CL = 2 or CL = 3). They must also contain the mandatory Joint Electronic Device Engineering Council (JEDEC) Serial Presence Detect (SPD) information. DIMMs constructed with x4 SDRAM are not supported; the system will not start using unsupported DIMMs. IMPORTANT: Do not mix registered and unregistered, or ECC and non-ECC SDRAM DIMMs. Otherwise, your system will not function properly. CAUTION: Your DIMM sockets have gold metal contacts. When upgrading your memory, it is important to use DIMMs with gold metal contacts (not tin-lead) to prevent corrosion and/or oxidation resulting from having incompatible metals in contact with each other. Compaq Professional Workstation AP200 Reference Guide