Compaq AP200 Reference Guide - Page 46
Disabling a Serial Port or Parallel Port, F10=Setup, Enter
UPC - 743172868534
View all Compaq AP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
3-9 Disabling a Serial Port or Parallel Port To disable either of the serial ports or the parallel port, follow these steps: 1. Turn on the workstation. 2. When you see the words "F10=Setup" in the bottom-right corner of the screen, press F10. NOTE: You have approximately two seconds to press F10. If you do not press F10 during this time, you must turn the workstation off, then on again to access the utility. 3. Press Enter to bypass the welcome screens and display the main menu. 4. From the main menu, select Computer Setup, then press Enter. 5. From the Computer Setup main menu, select Advanced, then Onboard Devices. 6. Select the Serial or Parallel Port you wish to disable. 7. Use the arrow keys to select the disable setting. 8. Save the configuration and exit the utility. 9. Restart the workstation. Compaq Professional Workstation AP200 Reference Guide