Compaq AP200 Reference Guide - Page 45
Disabling Diskette Boot or Diskette Write, IMPORTANT
UPC - 743172868534
View all Compaq AP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
3-8 Intelligent Manageability Disabling Diskette Boot or Diskette Write IMPORTANT: If you disable the diskette drive, the FailSafe Boot Block ROM will ignore the disabled component to accommodate a system ROM recovery in the event a system ROM failure occurs. To disable the factory settings (that is, to prevent boot from a diskette or prevent save to a diskette), follow these steps: 1. Turn on the workstation. 2. When you see the words "F10=Setup" in the bottom-right corner of the screen, press F10. NOTE: You have approximately two seconds to press F10. If you do not press F10 during this time, you must turn the workstation off, then on again to access the utility. 3. Press Enter to bypass the welcome screens and display the main menu. 4. From the main menu, select Computer Setup, then press Enter. 5. From the Computer Setup main menu, select Storage. 6. Under Removable Media, select the function you want to disable. 7. Save the configuration and exit the utility. 8. Restart the workstation. NOTE: Compaq recommends that you establish a Setup password to prevent another user from entering the Computer Setup utility and changing any settings.