Compaq AP200 Reference Guide - Page 51
QuickLock/QuickBlank, Enabling QuickLock and QuickBlank, Disabling the Keyboard and Mouse, Interface
UPC - 743172868534
View all Compaq AP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
3-14 Intelligent Manageability QuickLock/QuickBlank QuickLock/QuickBlank disables the keyboard and mouse interface, and can blank the screen, without exiting open applications. Enabling QuickLock and QuickBlank 1. Turn on or restart the workstation. 2. When the F10 Setup message appears in the lower-right corner of the screen, press the F10 key. NOTE: If you do not press the F10 key while the message is displayed, you must turn the workstation off, then on again, to access the utility. 3. Press Enter to bypass the welcome screens and display the main menu. 4. From the main menu, select Security, then select Password Options and follow the instructions on the screen. 5. Enable QuickLock. This displays the QuickLock and QuickBlank options. 6. Enable QuickBlank. 7. Save the configuration and exit the utility. Disabling the Keyboard and Mouse Interface Enter the QuickLock key combination (Ctrl+Alt+L) to disable the keyboard and mouse (or other input device connected to the mouse connector). The applications you are running cannot be accessed, but remain in view, unless the QuickBlank feature is also enabled through the Computer Setup utility. Enabling the Keyboard and Mouse Interface To enable the keyboard and input device connected to the mouse connector, enter the Power-on password. NOTE: For security reasons, the characters you type do not appear on the screen. The application will not be affected by the characters typed.