Compaq AP200 Reference Guide - Page 90
drive, connect the audio cable. The other end of the audio cable should
UPC - 743172868534
View all Compaq AP200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
4-26 Hardware Upgrades 3. Install the drive in the desired drive bay by sliding it into the front of the drive cage; the drivelock automatically secures the drive in the bay. NOTE: Be sure the guide screws line up with the guide slots in the drive cage. Figure 4-17. Aligning the guide screws and installing an optional 5.25-inch drive 4. Connect the drive power and signal cables and, if it is a CD-ROM drive, connect the audio cable. The other end of the audio cable should be connected to the optional audio board, if installed. Figure 4-18. Connecting the drive cables to the drive
4-26
Hardware Upgrades
3.
Install the drive in the desired drive bay by sliding it into the front of
the drive cage; the drivelock automatically secures the drive in the bay.
NOTE
:
Be sure the guide screws line up with the guide slots in the drive cage.
Figure 4-17.
Aligning the guide screws and installing an optional 5.25-inch drive
4.
Connect the drive power and signal cables and, if it is a CD-ROM
drive, connect the audio cable. The other end of the audio cable should
be connected to the optional audio board, if installed.
Figure 4-18.
Connecting the drive cables to the drive