Creative CT4180 Getting Started Guide - Page 36
Problems in DOS, Problem, Cause, Solution, SET SOUND=C:\SB16, SHELL=C:\COMMAND.COM, E:512 - sound blaster manual
View all Creative CT4180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Problems in DOS Problem Cause Solution Problem Cause Solution SOUND or BLASTER environment values are missing or incorrect. When you install your audio software, the commands are automatically added to the AUTOEXEC.BAT file so that both environment strings are set up when your system restarts. However, the command to set up the SOUND or BLASTER environment might not be included in the AUTOEXEC.BAT file because you might have edited the file and deleted the command, or you might have installed another software which assigned another value to the command. To set up the BLASTER environment in the respective system files, run DIAGNOSE (see "Understanding the Installation" on page A-1). To set up the SOUND environment, insert the statement SET SOUND=C:\SB16 into the AUTOEXEC.BAT file using a text editor. Reboot your system for the changes to take effect. The directory name SB16 may be VIBRA16 in your installation. Error message "Out of environment space". The system environment space is used up. Add the statement SHELL=C:\COMMAND.COM /E:512 /P to the CONFIG.SYS file. /E defines a new size for the system environment space. You can choose a higher value if the environment size is already 512 bytes. (Usually, the next value is 1024 bytes.) For details on the SHELL command, refer to your DOS manual. Troubleshooting C-3