Creative CT4180 Getting Started Guide - Page 90
Checking System Requirements, Changing Audio Card Settings, Changing Hardware Resource Settings
View all Creative CT4180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Checking System Requirements Your card requires at least: u An Intel Pentium or AMD K5 90MHz computer with a VGA or SVGA card installed u 4 MB RAM u 7.5 MB free hard disk space u Windows 95 or Windows 3.1x with DOS 5.0 and a Plug and Play (PnP) configuration manager Changing Audio Card Settings This section is organized as follows: u Changing Hardware Resource Settings u Enabling/Disabling Creative 3D Stereo Enhancement Effect u Enabling/Disabling Full Duplex Operation u Enabling/Disabling Joystick Interface u Enabling/Disabling the Built-in Amplifier Changing Hardware Resource Settings The following tables list the possible default settings used by various devices on your card. When necessary (for example, when there is a hardware conflict), you may change one or more of these settings. For more details, see Appendix A, "Understanding the Installation" in the Getting Started manual. Table 1: Input/Output (I/O) addresses. Device Audio interface Game/Joystick interface MPU-401 UART MIDI interface Stereo music synthesizer DefaultI/O Address Range 220H to 22FH 201H 330H to 331H 388H to 38BH Table 2: Interrupt request (IRQ) line assignments. Device Default IRQ Line Audio interface 5 Table 3: Direct memory access (DMA) channel assignments. Usage First DMA channel Second DMA channel Default DMA Channel 1 3 Table 4: BLASTER environment variables. Parameter Axxx Preferred Value A220 2