Dell B3460dn Mono Laser Printer User's Guide - Page 14
Installing a memory card, Warning-Potential Damage, CAUTION-SHOCK HAZARD
View all Dell B3460dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Additional printer setup 14 2 Use the following illustration to locate the appropriate connector. Warning-Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board electronic components or connectors. 1 2 1 Memory card connector 2 Option card connector Installing a memory card CAUTION-SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. Warning-Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer before touching any controller board electronic components or connectors. An optional memory card can be purchased separately and attached to the controller board. 1 Access the controller board. For more information, see "Accessing the controller board" on page 13. 2 Unpack the memory card. Warning-Potential Damage: Do not touch the connection points along the edge of the card. Doing so may cause damage.