Dell B3460dn Mono Laser Printer User's Guide - Page 88
Reducing printer noise, Adjusting Sleep mode, Using the Embedded Web Server
View all Dell B3460dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Saving money and the environment 88 > Settings > Settings > > General Settings > > Eco‑Mode > > select the setting you want Use To Off Use the factory default settings for all settings associated with Eco‑Mode. This setting supports the performance specifications for your printer. Energy Reduce energy use, especially when the printer is idle. • Printer engine motors do not start until a job is ready to print. You may notice a short delay before the first page is printed. • The printer enters Sleep mode after one minute of inactivity. Energy/Paper Use all the settings associated with Energy and Paper modes. Plain Paper • Enable the automatic two‑sided (duplex) feature. • Turn off print log features. 2 Press . Reducing printer noise Use Quiet mode to reduce the printer noise. 1 From the printer control panel, navigate to: > Settings > Settings > 2 Select a setting you want. Use On Off > General Settings > > Quiet Mode > To Reduce printer noise. Notes: • Print jobs will process at a reduced speed. • Printer engine motors do not start until a document is ready to print. There is a short delay before the first page is printed. Use factory default settings. Note: This setting supports the performance specifications of the printer. 3 Press . Adjusting Sleep mode To save energy, decrease the number of minutes the printer waits before it enters Sleep mode. Available settings range from 1-180 minutes. The factory default setting is 30 minutes. Using the Embedded Web Server 1 Open a Web browser, and then type the printer IP address in the address field.