Dell B3460dn Mono Laser Printer User's Guide - Page 68
NPA Mode, Notes, USB Buffer, Mac Binary PS, ENA Address, ENA Netmask, ENA Gateway
View all Dell B3460dn Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Understanding the printer menus 68 Use NPA Mode On Off Auto USB Buffer Disabled Auto 3K to [maximum size allowed] Mac Binary PS On Off Auto ENA Address yyy.yyy.yyy.yyy ENA Netmask yyy.yyy.yyy.yyy ENA Gateway yyy.yyy.yyy.yyy To Set the printer to perform the special processing required for bidirectional communication following the conventions defined by the NPA protocol. Notes: • Auto is the factory default setting. Auto sets the printer to examine data, determine the format, and then process it appropriately. • The printer automatically restarts when changing the setting from the printer control panel. The menu selection is then updated. Set the size of the USB input buffer. Notes: • Auto is the factory default setting. • Disabled turns off job buffering. • The USB buffer size value can be changed in 1-KB increments. • The maximum size allowed depends on the amount of memory in the printer, the size of the other link buffers, and whether Resource Save is set to On or Off. • To increase the maximum size range for USB Buffer, disable or reduce the size of the parallel, serial, and network buffers. • The printer automatically restarts when the setting is changed from the printer control panel. The menu selection is then updated. Set the printer to process Macintosh binary PostScript print jobs. Notes: • Auto is the factory default setting. • On processes raw binary PostScript print jobs. • Off filters print jobs using the standard protocol. Set the network address information for an external print server. Note: This menu is available only when the printer is attached to an external print server through the USB port. Set the netmask information for an external print server. Note: This menu is available only when the printer is attached to an external print server through the USB port. Set the gateway information for an external print server. Note: This menu is available only when the printer is attached to an external print server through the USB port.