Dell B3460dn Mono Laser Printer User's Guide - Page 66

Wireless menu, Network/Ports, Standard Network, Wireless, Network [x], Network [x] Setup

Page 66 highlights

Understanding the printer menus 66 Use To Set Hostname* Set the host name. Note: The host name is limited to 15 characters, and accepts US‑ASCII, alphanumeric characters and hyphen only. View Address* View the current IPv6 addresses. View Router Address* View the current router address. Enable DHCPv6 On Off Enable DHCPv6 in the printer. Note: On is the factory default setting. * These settings can be changed only from the Embedded Web Server. Wireless menu Note: This menu is available only in printer models connected to a wireless network. To access the menu, navigate to any of the following: • Network/Ports > Standard Network > Standard Network Setup >Wireless • Network/Ports > Network [x] > Network [x] Setup > Wireless Use Wi‑Fi Protected Setup (WPS) Start Push Button Method Start PIN Method Enable/Disable WPS Auto‑detection Enable Disable Network Mode Infrastructure Ad hoc To Establish a wireless network and enable network security. Notes: • Start Push Button Method connects the printer to a wireless network by pressing buttons on both the printer and the access point (wireless router) within a given period of time. • Start PIN Method connects the printer to a wireless network by using a PIN on the printer and entering it into the wireless settings of the access point. Automatically detect the connection method that an access point with WPS uses-Start Push Button Method or Start PIN Method. Note: Disable is the factory default setting. Specify the network mode. Notes: • Ad hoc is the factory default setting. This configures wireless connection directly between the printer and a computer. • Infrastructure lets the printer access a network using an access point. Compatibility 802.11b/g 802.11b/g/n Specify the wireless standard for the wireless network. Note: The 802.11b/g/n is the factory default setting. Choose Network View Signal Quality Select an available network for the printer to use. View the quality of the wireless connection.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167

Use
To
Set Hostname
*
Set the host name.
Note:
The host name is limited to 15 characters, and accepts US
ASCII,
alphanumeric characters and hyphen only.
View Address
*
View the current IPv6 addresses.
View Router Address
*
View the current router address.
Enable DHCPv6
On
Off
Enable DHCPv6 in the printer.
Note:
On is the factory default setting.
*
These settings can be changed only from the Embedded Web Server.
Wireless menu
Note:
This menu is available only in printer models connected to a wireless network.
To access the menu, navigate to any of the following:
Network/Ports
>
Standard Network
>
Standard Network Setup
>
Wireless
Network/Ports
>
Network [x]
>
Network [x] Setup
>
Wireless
Use
To
Wi
Fi Protected Setup (WPS)
Start Push Button Method
Start PIN Method
Establish a wireless network and enable network security.
Notes:
Start Push Button Method connects the printer to a wireless
network by pressing buttons on both the printer and the access
point (wireless router) within a given period of time.
Start PIN Method connects the printer to a wireless network by
using a PIN on the printer and entering it into the wireless settings
of the access point.
Enable/Disable WPS Auto
detection
Enable
Disable
Automatically detect the connection method that an access point with
WPS uses—Start Push Button Method or Start PIN Method.
Note:
Disable is the factory default setting.
Network Mode
Infrastructure
Ad hoc
Specify the network mode.
Notes:
Ad hoc is the factory default setting. This configures wireless
connection directly between the printer and a computer.
Infrastructure lets the printer access a network using an access
point.
Compatibility
802.11b/g
802.11b/g/n
Specify the wireless standard for the wireless network.
Note:
The 802.11b/g/n is the factory default setting.
Choose Network
Select an available network for the printer to use.
View Signal Quality
View the quality of the wireless connection.
Understanding the printer menus
66