Dell Dimension 8200 Dell Dimension 8200 Systems Solutions Guide - Page 88
These rails are not attached to the drive cage with screws. To remove, Remove the two short
View all Dell Dimension 8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
www.dell.com | support.dell.com 4 Unpack the drive and prepare it for installation. See the documentation that came with the drive to ensure that the drive is setup for your computer. 5 Open the computer cover (see page 67). 6 To remove the front panel insert, carefully press the panel out from the inside of the computer. 7 To remove the drive-bay cover panel, press the four tabs and pull the insert away from the panel. remove front panel insert through here securing tabs (4) front panel insert securing tab drive-bay cover panel front panel insert 8 Remove the two short, green plastic rails from the inside of the drive cage. These rails are not attached to the drive cage with screws. To remove the rails, firmly pull the rails from the drive cage. 9 Attach the rails to the drive using the two captive screws on each rail. Ensure that the rail tabs are positioned at the back of the drive. 10 Gently slide the drive into the bay until you hear a click. 88 Adding Parts