Dell PowerEdge 840 Hardware Owner's Manual (PDF) - Page 35
Console Redirection Screen, System Security Screen, Console, Redirection - nic
View all Dell PowerEdge 840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Table 2-4. Integrated Devices Screen Options (continued) Option Serial Port (COM1 default) Speaker (On default) Description Serial Port options are COM1, COM3, BMC Serial, BMC NIC, COM1/BMC, and Off. If an optional remote access controller (RAC) is installed in the system, RAC is an additional option. Serial Port shares three usage models. For standard usage, Serial Port attempts to use COM1 first, and then COM3. For BMC usage, serial port 1 uses the COM1 address and communication can be either via the serial port or the integrated shared NIC. RAC control uses only the COM1 address. The COM1/BMC setting allows you to toggle the system between a COM1 setting and BMC Serial setting. In this mode, press to enter the BMC Serial setting and press to return to the COM1 setting. Off and COM3 are not available options when Console Redirection is set to use Serial Port 1. Enables or disables the system internal speaker. Console Redirection Screen Table 2-5 lists the options and descriptions for the information fields that appear on the Console Redirection screen. Table 2-5. Console Redirection Screen Options Option Console Redirection (Off default) Failsafe Baud Rate (11520 default) Remote Terminal Type (VT 100/VT 220 default) Redirection After Boot (Enabled default) Description Sets the console redirection feature to Serial Port or Off. Displays if the failsafe baud rate is used for console redirection. Select either VT 100/VT 220 or ANSI. Enables or disables console redirection after your system restarts. System Security Screen Table 2-6 lists the options and descriptions for the information fields that appear on the System Security screen. Using the System Setup Program 35