Dell PowerEdge 840 Hardware Owner's Manual (PDF) - Page 75
Replacing the SAS Controller Card Battery, Connect the battery cable to the SAS controller card.
View all Dell PowerEdge 840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Replacing the SAS Controller Card Battery 1 Disconnect the battery cable from the SAS controller card. Figure 3-20. Replacing the SAS Controller Card Battery 2 1 1 chassis notches 2 battery/battery holder 2 Remove the battery and battery holder from the system chassis. See Figure 3-20. 3 Insert the new battery into the battery bay, ensuring that the battery is aligned and fully seated into the slots. 4 Connect the battery cable to the SAS controller card. Installing System Components 75
Installing System Components
75
Replacing the SAS Controller Card Battery
1
Disconnect the battery cable from the SAS controller card.
Figure 3-20.
Replacing the SAS Controller Card Battery
2
Remove the battery and battery holder from the system chassis. See Figure 3-20.
3
Insert the new battery into the battery bay, ensuring that the battery is aligned and fully seated into the
slots.
4
Connect the battery cable to the SAS controller card.
1
chassis notches
2
battery/battery holder
1
2