Dell PowerEdge 840 Hardware Owner's Manual (PDF) - Page 45
Removing the Front-Panel Drive Inserts, on the sides of the insert.
View all Dell PowerEdge 840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Before you install a 5.25-inch drive in an empty external drive bay, you must first remove both front-panel drive inserts. If you remove a 5.25-inch drive permanently, you must install both inserts. Removing the Front-Panel Drive Inserts CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge. 1 Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Remove the bezel. See "Removing the Bezel" on page 43. 3 Remove the bezel drive insert (see Figure 3-4): a From inside the bezel, press the center of the insert outward with your thumbs to loosen the tabs on the sides of the insert. b Pull the insert out of the bezel. 4 Remove the chassis drive insert (see Figure 3-4): a Press both sides of the insert to loosen the tabs on the insert. b Pull the insert out of the chassis. Installing System Components 45