Dell PowerEdge 840 Hardware Owner's Manual (PDF) - Page 49
Optical or Tape Drives - support
View all Dell PowerEdge 840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Figure 3-5. Removing or Installing a Diskette Drive 3 2 4 1 5 1 diskette (3.5-inch) drive 4 interface cable 2 externally accessible drive bay 5 power cable 3 screws (2) Optical or Tape Drives An optical drive is standard in the first external drive bay. An additional IDE or SCSI tape drive can be installed in the second external drive bay. These drives connect either to the system board or to an optional controller card. NOTE: Installing an additional optical drive in the second external drive bay is not supported. Installing System Components 49
Installing System Components
49
Figure 3-5.
Removing or Installing a Diskette Drive
Optical or Tape Drives
An optical drive is standard in the first external drive bay. An additional IDE or SCSI tape drive can be
installed in the second external drive bay. These drives connect either to the system board or to an
optional controller card.
NOTE:
Installing an additional optical drive in the second external drive bay is not supported.
1
diskette (3.5-inch) drive
2
externally accessible drive
bay
3
screws (2)
4
interface cable
5
power cable
1
2
5
4
3