Dell PowerEdge 840 Hardware Owner's Manual (PDF) - Page 70
Replacing the Power Supply - power supply replacement
View all Dell PowerEdge 840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Figure 3-17. Removing the Power Supply 1 2 1 power supply 2 screws (4) 6 Slide the power supply toward the front of the system, and then lift the power supply up and out of the system. Replacing the Power Supply 1 Lower the power supply into the system and align the mounting holes with the holes on the back panel. 2 Install the four screws securing the power supply to the back panel. 3 Install the cooling shroud. See "Installing the Cooling Shroud" on page 65. 70 Installing System Components
70
Installing System Components
Figure 3-17.
Removing the Power Supply
6
Slide the power supply toward the front of the system, and then lift the power supply up and out of the
system.
Replacing the Power Supply
1
Lower the power supply into the system and align the mounting holes with the holes on the back
panel.
2
Install the four screws securing the power supply to the back panel.
3
Install the cooling shroud. See "Installing the Cooling Shroud" on page 65.
1
power supply
2
screws (4)
2
1