Dell PowerEdge 840 Hardware Owner's Manual (PDF) - Page 81
Installing a Processor, position so that the socket is ready for the new processor. See
View all Dell PowerEdge 840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
5 Press down on the processor socket release lever, then pull the release lever upward to the fully open position. See Figure 3-23. 6 Open the processor cover. See Figure 3-23. 7 Lift the processor vertically out of the socket. Leave the processor cover and release lever in the open position so that the socket is ready for the new processor. See Figure 3-23. Figure 3-23. Removing/Replacing the Processor 2 1 5 4 3 1 processor socket release lever 2 processor cover 4 processor socket 5 processor 3 pin-1 locators Installing a Processor CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge. 1 Unpack the new processor and heat sink, if provided. 2 Ensure that the processor socket release lever is in the fully open position. 3 Align the pin 1 corners of the processor and socket. See Figure 3-23. Installing System Components 81