Dell XPS 600 Renegade Owner's Manual - Page 56
Light Pattern, Problem Description, Suggested Resolution, connections, and then restart the computer.
View all Dell XPS 600 Renegade manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
www.dell.com | support.dell.com Light Pattern Problem Description Suggested Resolution A possible graphics card failure has occurred. • If the computer has a graphics card, remove the card (see "Removing PCI and PCI Express Cards" on page 89), reinstall it, and then restart the computer. • If the problem still exists, install a graphics card that you know works and restart the computer. • If the problem persists, contact Dell (see "Contacting Dell" on page 142). A possible floppy drive or hard drive failure has Reseat all power and data cables and restart occurred. the computer. A possible USB failure has occurred. Reinstall all USB devices, check cable connections, and then restart the computer. No memory modules are detected. Memory modules are detected, but a memory configuration or compatibility error exists. • If you have two or more memory modules installed, remove the modules, reinstall one module (see "Installing Memory" on page 80), and then restart the computer. If the computer starts normally, reinstall an additional module. Continue until you have identified a faulty module or reinstalled all modules without error. • If available, install properly working memory of the same type into your computer (see "Installing Memory" on page 80). • If the problem persists, contact Dell (see "Contacting Dell" on page 142). • Ensure that no special memory module/memory connector placement requirements exist (see "Memory" on page 79). • Verify that the memory modules that you are installing are compatible with your computer (see "Memory" on page 79). • If the problem persists, contact Dell (see "Contacting Dell" on page 142 56 Advanced Troubleshooting