Denon AVR-1912 Owners Manual - Page 56
-channel Surround back speaker connection, For speaker cable connections, see, For speaker impedance
UPC - 883795001984
View all Denon AVR-1912 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Basic version 6.1-channel (Surround back speaker) connection If using only one surround back speaker (with a 6.1-channel connection), connect to the "L" side of the SURR. BACK/AMP ASSIGN terminal. For speaker settings in this case, see "When 6.1ch (Surround back speaker) installed" (vpage 50). To perform 6.1-channel playback using the surround back speaker, set "Amp Assign" to "NORMAL" in steps 3 and 4 for "Set up "Amp Assign"" (vpage 56). Also use the "Speaker Config." setting (vpage 83) to set "S.Back" to "1spkr". NOTE • For speaker cable connections, see C page 6 "Connecting the speakers". • For speaker impedance, see page 51. Connect Advanced version Information FL SW FR C SL SR SB 53
53
FL
FR
C
SB
SL
SR
SW
6.1-channel (Surround back speaker) connection
If using only one surround back speaker (with a 6.1-channel connection), connect to the “L” side of the
SURR. BACK/AMP ASSIGN terminal.
For speaker settings in this case, see “When 6.1ch (Surround back speaker) installed” (
v
page 50
).
To perform 6.1-channel playback using the surround back speaker, set “Amp Assign” to “NORMAL” in
steps 3 and 4 for “Set up “Amp Assign”” (
v
page 56
).
Also use the “Speaker Config.” setting (
v
page 83
) to set “S.Back” to “1spkr”.
NOTE
•
For speaker cable connections, see
C
page 6 “Connecting the speakers”
.
•
For speaker impedance, see
page 51.
Connect