Denon AVR-1912 Owners Manual - Page 88

When the Speaker Config. - S.Back setting, Crossover Frequency

Get Denon AVR-1912 PDF manuals and user guides
UPC - 883795001984
View all Denon AVR-1912 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

Basic version Advanced version Setting items Setting details Channel Level Test Tone Start : Output test tone. Set the volume of the test • Front L / F.Height L / Center / F.Height R / Front R / Surround R / tone to be the same when it S.Back Rz / S.Back Lz / Surround L / Subwoofer : Select the speaker. is output from each speaker. zz When the "Speaker Config." - "S.Back" setting (vpage 83) is set to "1spkr", "S.Back" is displayed. • -12.0dB - +12.0dB (0.0dB) : Adjust the volume. When "Channel Level" is adjusted, the adjusted values are set for all the surround modes. To adjust the channel level separately for the different surround modes, use the operation see page 60. NOTE • Speakers set to "None" in the "Speaker Config." (vpage 83) settings are not displayed. • When a headphones jack is inserted in the PHONES jack of this unit, the "Channel Level" is not displayed. Default : The "Channel Level" settings are returned to the default settings. • Yes : Reset to the defaults. • No : Do not reset to the defaults. When you select "Default" and press ENTER, the "Return settings to the default?" prompt is displayed. Select either "Yes" or "No", and press ENTER. System Setup Setting items Setting details Crossover Freq. Crossover : Set the crossover frequency. Set the maximum frequency • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / of the bass signal output 250Hz from each channel to the subwoofer. Set the Crossover Frequency to suit the bass reproduction capability of the speaker Advanced : Specify crossover frequency for each speaker. • Front / Center / Surround / S.Back / F.Height : Select the speaker. • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 250Hz : Set the crossover frequency. being used. • "Crossover Freq." can be set when the "Bass Setting" - "Subwoofer Mode" (vpage 84) setting is "LFE+Main", or when you have a speaker that is set to "Small". • Always set the crossover frequency to "80Hz". When using small speakers, however, we recommend setting the crossover frequency to a higher frequency. • For speakers set to "Small", sound below the crossover frequency is cut from the sound output. The cut bass sound is output from the subwoofer or front speakers. • The speakers that can be set when "Advanced" is selected differ depending on to the "Subwoofer Mode" setting (vpage 84). • When "LFE" is selected, speakers set to "Small" at "Speaker Config." can be set. If the speakers are set to "Large", "Full Band" is displayed and the setting cannot be made. • If set to "LFE+Main", this setting can be made regardless of the speaker size. Front Sp Setup Set the front speakers to use for every surround mode. NOTE This can be set when "Amp Assign" is set to "Front B" (vpage 83). 2CH DIRECT/STEREO : The front speakers used in the direct, stereo and pure direct play modes (2 channel) are set in advance. • A : Front speaker A is used. • B : Front speaker B is used. • A+B : Both front speakers A and B are used. MULTI CH : The front speakers used in modes other than the direct, stereo and pure direct play modes (2 channel) are set in advance. • A : Front speaker A is used. • B : Front speaker B is used. • A+B : Both front speakers A and B are used. vSee overleaf Information BD 85

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
85
System Setup
Setting items
Setting details
Channel Level
Set the volume of the test
tone to be the same when it
is output from each speaker.
Test Tone Start
: Output test tone.
•
Front L
/
F.Height L
/
Center
/
F.Height R
/
Front R
/
Surround R
/
S.Back R
z
/
S.Back L
z
/
Surround L
/
Subwoofer
: Select the speaker.
z
When the “Speaker Config.” – “S.Back” setting (
v
page 83
) is set
to “1spkr”, “S.Back” is displayed.
•
–12.0dB – +12.0dB
(0.0dB)
: Adjust the volume.
When “Channel Level” is adjusted, the adjusted values are set for all the
surround modes. To adjust the channel level separately for the different
surround modes, use the operation see
page 60
.
NOTE
•
Speakers set to “None” in the “Speaker Config.” (
v
page  83
)
settings are not displayed.
•
When a headphones jack is inserted in the PHONES jack of this unit, the
“Channel Level” is not displayed.
Default
: The “Channel Level” settings are returned to the default settings.
•
Yes
: Reset to the defaults.
•
No
: Do not reset to the defaults.
When you select “Default” and press
ENTER
,
the “Return settings to the default?” prompt
is displayed. Select either “Yes” or “No”, and
press
ENTER
.
Setting items
Setting details
Crossover Freq.
Set the maximum frequency
of the bass signal output
from each channel to
the subwoofer. Set the
Crossover Frequency to
suit the bass reproduction
capability of the speaker
being used.
Crossover
: Set the crossover frequency.
•
40Hz
/
60Hz
/
80Hz
/
90Hz
/
100Hz
/
110Hz
/
120Hz
/
150Hz
/
200Hz
/
250Hz
Advanced
: Specify crossover frequency for each speaker.
•
Front
/
Center
/
Surround
/
S.Back
/
F.Height
: Select the speaker.
•
40Hz
/
60Hz
/
80Hz
/
90Hz
/
100Hz
/
110Hz
/
120Hz
/
150Hz
/
200Hz
/
250Hz
: Set the crossover frequency.
•
“Crossover Freq.” can be set when the “Bass Setting” – “Subwoofer
Mode” (
v
page  84
) setting is “LFE+Main”, or when you have a
speaker that is set to “Small”.
•
Always set the crossover frequency to “80Hz”. When using small
speakers, however, we recommend setting the crossover frequency to
a higher frequency.
•
For speakers set to “Small”, sound below the crossover frequency
is cut from the sound output. The cut bass sound is output from the
subwoofer or front speakers.
•
The speakers that can be set when “Advanced” is selected differ
depending on to the “Subwoofer Mode” setting (
v
page 84
).
•
When “LFE” is selected, speakers set to “Small” at “Speaker Config.”
can be set. If the speakers are set to “Large”, “Full Band” is displayed
and the setting cannot be made.
•
If set to “LFE+Main”, this setting can be made regardless of the
speaker size.
Front Sp Setup
Set the front speakers to
use for every surround
mode.
NOTE
This can be set when “Amp
Assign” is set to “Front B”
(
v
page 83
).
2CH DIRECT/STEREO
: The front speakers used in the direct, stereo and
pure direct play modes (2 channel) are set in advance.
•
A
: Front speaker A is used.
•
B
: Front speaker B is used.
•
A+B
: Both front speakers A and B are used.
MULTI CH
: The front speakers used in modes other than the direct,
stereo and pure direct play modes (2 channel) are set in advance.
•
A
: Front speaker A is used.
•
B
: Front speaker B is used.
•
A+B
: Both front speakers A and B are used.