Garmin GPSMAP 5215 Owner's Manual - Page 74
Messages and Alarms, Can't Read Voltages That High, Limited To Top Of Range - update error messages
View all Garmin GPSMAP 5215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Appendix Messages and Alarms AIS: Dangerous Target-an AIS target currently presents a collision threat. Alarm Clock-the alarm clock alarm has sounded. Anchor Drag Alarm-boat has drifted out of the user-set distance range. Antenna Input is Shorted-there is a short in the wiring to the GPS 17 antenna. Approaching Waypoint -boat is a specified alarm distance from the destination waypoint. Arrival Alarm -arriving at destination waypoint. Auto-guidance unable to calculate route-(BlueChart g2 Vision) auto-guidance cannot calculate the route. Auto-guidance unable to calculate route. Ending position not within safe depth- (BlueChart g2 Vision) auto-guidance cannot calculate the route; choose an end point within the specified safe depth. Auto-guidance unable to calculate route. Starting position not within safe depth- (BlueChart g2 Vision) auto-guidance cannot calculate the route; travel to water within the specified safe depth. Auto-guidance unable to calculate route, please shorten route-(BlueChart g2 Vision) autoguidance cannot calculate the route, choose closer end point. Battery Alarm-user-set battery alarm has sounded. Boat is not Moving Fast Enough to Calibrate-(speed sensor) appears during water speed calibration. Check speed wheel for blockage and calibrate again. If wheel is clear, calibrate again and increase speed. Calibration is complete-touchscreen calibration successful. Can't Read User Card-cannot read card when attempting a user data transfer. Can't Read Voltages That High, Limited To Top Of Range-entering a battery alarm voltage higher than the chartplotter can read. Can't Read Voltages That Low, Limited To Bottom Of Range-entering a battery alarm voltage lower than the chartplotter can read. Can't Unlock Maps-maps are locked and cannot be used on this chartplotter. Can't Write User Card-cannot write card when attempting a user data transfer. Cartography Service Incompatible. Software Update Required-a software update is needed. Contact product support for assistance updating your chartplotter software. Check XM Antenna-XM antenna not connected. Check connectivity. Cooling Fan Voltage Too High-the chartplotter's cooling fan voltage is higher than expected. Contact product support. Cooling Fan Voltage Too Low-the chartplotter's cooling fan voltage is lower than expected. Contact product support. Database Error-general database error. Contact product support. Deep Water Alarm-(sonar) boat has entered user-defined value for deep water. Directory Item With This MMSI Already Exists-MMSI number already in directory. 70 GPSMAP 5000 Series Owner's Manual