HP 6125G HP 6125G & 6125G/XG Blade Switches ACL and QoS Configuration - Page 44

Figure 13 Network diagram Configuration procedures 1. Configure Device A: # Configure ACL 2001 and ACL 2002 to match traffic from Server and Host A, respectively. system-view [DeviceA] acl number 2001 [DeviceA-acl-basic-2001] rule permit source 1.1.1.1 0 [DeviceA-acl-basic-2001] quit [DeviceA] acl number 2002 [DeviceA-acl-basic-2002] rule permit source 1.1.1.2 0 [DeviceA-acl-basic-2002] quit # Create a class named server, and use ACL 2001 as the match criterion. Create a class named host, and use ACL 2002 as the match criterion. [DeviceA] traffic classifier server [DeviceA-classifier-server] if-match acl 2001 [DeviceA-classifier-server] quit [DeviceA] traffic classifier host [DeviceA-classifier-host] if-match acl 2002 [DeviceA-classifier-host] quit # Create a behavior named server, and configure the CAR action for the behavior as follows: set the CIR to 1024 kbps, and mark the excess packets (red packets) with DSCP value 0 and transmit them. [DeviceA] traffic behavior server [DeviceA-behavior-server] car cir 1024 red remark-dscp-pass 0 [DeviceA-behavior-server] quit # Create a behavior named host, and configure the CAR action for the behavior as follows: set the CIR to 256 kbps. [DeviceA] traffic behavior host [DeviceA-behavior-host] car cir 256 [DeviceA-behavior-host] quit # Create a QoS policy named car, and associate class server with behavior server and class host with behavior host. [DeviceA] qos policy car [DeviceA-qospolicy-car] classifier server behavior server [DeviceA-qospolicy-car] classifier host behavior host 38