HP 6125G HP 6125G & 6125G/XG Blade Switches ACL and QoS Configuration - Page 51

Configuration procedure, Configuring WFQ queuing

Get HP 6125G PDF manuals and user guides View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Configuration procedure # Enter system view. system-view # Configure WRR queuing on port GigabitEthernet 1/0/1. [Sysname] interface GigabitEthernet 1/0/1 [Sysname-GigabitEthernet1/0/1] qos wrr weight [Sysname-GigabitEthernet1/0/1] qos wrr 0 group 1 weight 1 [Sysname-GigabitEthernet1/0/1] qos wrr 1 group 1 weight 2 [Sysname-GigabitEthernet1/0/1] qos wrr 2 group 1 weight 4 [Sysname-GigabitEthernet1/0/1] qos wrr 3 group 1 weight 6 [Sysname-GigabitEthernet1/0/1] qos wrr 4 group 1 weight 8 [Sysname-GigabitEthernet1/0/1] qos wrr 5 group 1 weight 10 [Sysname-GigabitEthernet1/0/1] qos wrr 6 group 1 weight 12 [Sysname-GigabitEthernet1/0/1] qos wrr 7 group 1 weight 14 Configuring WFQ queuing Configuration procedure To configure WFQ queuing: Step 1. Enter system view. 2. Enter interface view. 3. Enable byte-count or packet-based WFQ queuing. 4. Configure the scheduling weight for a queue. 5. Configure the minimum guaranteed bandwidth for a WFQ queue. 6. Display WFQ queuing configuration. Command system-view interface interface-type interface-number qos wfq [ byte-count | weight ] • For a byte-count WFQ queue: qos wfq queue-id group group-id byte-count schedule-value • For a packet-based WFQ queue: qos wfq queue-id group group-id weight schedule-value qos bandwidth queue queue-id min bandwidth-value display qos wfq interface [ interface-type interface-number ] [ | { begin | exclude | include } regular-expression ] Remarks N/A N/A The default queuing algorithm on an interface is SP queuing. Select a command according to the WFQ type (byte-count or packet-based) you have enabled. If you have enabled WFQ on the port, byte-count WRR applies by default, and the default scheduling weight is 1 for each queue. Optional. 64 kbps by default for each queue. Optional. Available in any view NOTE: To guarantee successful WFQ configuration, make sure that the scheduling weight type (byte-count or packet-based) is the same as the WFQ queuing type (byte-count or packet-based) when you configure the scheduling weight for a WFQ queue. 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
45
Configuration procedure
# Enter system view.
<Sysname> system-view
# Configure WRR queuing on port GigabitEthernet 1/0/1.
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wrr weight
[Sysname-GigabitEthernet1/0/1] qos wrr 0 group 1 weight 1
[Sysname-GigabitEthernet1/0/1] qos wrr 1 group 1 weight 2
[Sysname-GigabitEthernet1/0/1] qos wrr 2 group 1 weight 4
[Sysname-GigabitEthernet1/0/1] qos wrr 3 group 1 weight 6
[Sysname-GigabitEthernet1/0/1] qos wrr 4 group 1 weight 8
[Sysname-GigabitEthernet1/0/1] qos wrr 5 group 1 weight 10
[Sysname-GigabitEthernet1/0/1] qos wrr 6 group 1 weight 12
[Sysname-GigabitEthernet1/0/1] qos wrr 7 group 1 weight 14
Configuring WFQ queuing
Configuration procedure
To configure WFQ queuing:
Step
Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
interface
interface-type interface-number
N/A
3.
Enable byte-count or
packet-based WFQ
queuing.
qos wfq
[
byte-count
|
weight
]
The default queuing algorithm on
an interface is SP queuing.
4.
Configure the
scheduling weight for a
queue.
•
For a byte-count WFQ queue:
qos wfq
queue-id
group
group-id
byte-count
schedule-value
•
For a packet-based WFQ queue:
qos wfq
queue-id
group
group-id
weight
schedule-value
Select a command according to
the WFQ type (byte-count or
packet-based) you have enabled.
If you have enabled WFQ on the
port, byte-count WRR applies by
default, and the default scheduling
weight is 1 for each queue.
5.
Configure the minimum
guaranteed bandwidth
for a WFQ queue.
qos bandwidth queue
queue-id
min
bandwidth-value
Optional.
64 kbps by default for each queue.
6.
Display WFQ queuing
configuration.
display qos wfq interface
[
interface-type
interface-number
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Optional.
Available in any view
NOTE:
To guarantee successful WFQ configuration, make sure that the scheduling weight type (byte-count or
packet-based) is the same as the WFQ queuing type (byte-count or packet-based) when you configure the
scheduling weight for a WFQ queue.