HP 6125G HP 6125G & 6125G/XG Blade Switches ACL and QoS Configuration - Page 72
Class-based accounting configuration example, Network requirements, Configuration procedure
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Class-based accounting configuration example Network requirements As shown in Figure 22, Host is connected to GigabitEthernet 1/0/1 of Device A. Configure class-based accounting to collect statistics for traffic sourced from 1.1.1.1/24 and received on GigabitEthernet 1/0/1. Figure 22 Network diagram Configuration procedure # Create basic ACL 2000, and configure a rule to match packets with source IP address 1.1.1.1. system-view [DeviceA] acl number 2000 [DeviceA-acl-basic-2000] rule permit source 1.1.1.1 0 [DeviceA-acl-basic-2000] quit # Create a class named classifier_1, and use ACL 2000 as the match criterion in the class. [DeviceA] traffic classifier classifier_1 [DeviceA-classifier-classifier_1] if-match acl 2000 [DeviceA-classifier-classifier_1] quit # Create a behavior named behavior_1, and configure the traffic accounting action. [DeviceA] traffic behavior behavior_1 [DeviceA-behavior-behavior_1] accounting packet [DeviceA-behavior-behavior_1] quit # Create a policy named policy, and associate class classifier_1 with behavior behavior_1 in the policy. [DeviceA] qos policy policy [DeviceA-qospolicy-policy] classifier classifier_1 behavior behavior_1 [DeviceA-qospolicy-policy] quit # Apply the policy named policy to the incoming traffic of GigabitEthernet 1/0/1. [DeviceA] interface gigabitethernet 1/0/1 [DeviceA-GigabitEthernet1/0/1] qos apply policy policy inbound [DeviceA-GigabitEthernet1/0/1] quit # Display traffic statistics to verify the configuration. [DeviceA] display qos policy interface gigabitethernet 1/0/1 Interface: GigabitEthernet1/0/1 Direction: Inbound Policy: policy Classifier: classifier_1 66