HP 6125G HP 6125G & 6125G/XG Blade Switches ACL and QoS Configuration - Page 68
Configuring aggregate CAR, Overview, Configuration restrictions and guidelines
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Configuring aggregate CAR Overview An aggregate CAR action is created globally and can be directly applied to interfaces or referenced in the traffic behaviors associated with different traffic classes to police multiple traffic flows as a whole. The total rate of the traffic flows must conform to the traffic policing specifications set in the aggregate CAR action. Configuring aggregate CAR Configuration restrictions and guidelines In a traffic behavior, do not configure an aggregate CAR action together with any priority marking action (including local precedence, drop precedence, 802.1p priority, DSCP value, and IP precedence marking actions). Otherwise, you will fail to apply the QoS policy properly. Configuration procedure To configure aggregate CAR: Step 1. Enter system view. 2. Configure an aggregate CAR action. 3. Enter behavior view. 4. Reference the aggregate CAR in the traffic behavior. 5. Display the traffic behavior configuration information. 6. Display the configuration and statistics for the specified aggregate CAR. Command Remarks system-view N/A qos car car-name aggregative cir committed-information-rate [ cbs committed-burst-size [ ebs excess-burst-size ] ] [ pir peek-information-rate ] [ green action ] [ yellow action ] [ red action ] N/A traffic behavior behavior-name N/A car name car-name N/A display traffic behavior user-defined [ behavior-name ] [ | { begin | exclude | include } regular-expression ] Optional. Available in any view display qos car name Optional. [ car-name ] [ | { begin | exclude | include } regular-expression ] Available in any view 62