HP 6125G HP 6125G & 6125G/XG Blade Switches ACL and QoS Configuration - Page 59
Traffic filtering configuration example, Network requirements, Configuration procedure
View all HP 6125G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Traffic filtering configuration example Network requirements As shown in Figure 18, Host is connected to GigabitEthernet 1/0/1 of Device. Configure traffic filtering to filter the packets with source port being 21, and received on GigabitEthernet 1/0/1. Figure 18 Network diagram Host Device GE1/0/1 Configuration procedure # Create advanced ACL 3000, and configure a rule to match packets whose source port number is 21. system-view [DeviceA] acl number 3000 [DeviceA-acl-adv-3000] rule 0 permit tcp source-port eq 21 [DeviceA-acl-adv-3000] quit # Create a class named classifier_1, and use ACL 3000 as the match criterion in the class. [DeviceA] traffic classifier classifier_1 [DeviceA-classifier-classifier_1] if-match acl 3000 [DeviceA-classifier-classifier_1] quit # Create a behavior named behavior_1, and configure the traffic filtering action to drop packets. [DeviceA] traffic behavior behavior_1 [DeviceA-behavior-behavior_1] filter deny [DeviceA-behavior-behavior_1] quit # Create a policy named policy, and associate class classifier_1 with behavior behavior_1 in the policy. [DeviceA] qos policy policy [DeviceA-qospolicy-policy] classifier classifier_1 behavior behavior_1 [DeviceA-qospolicy-policy] quit # Apply the policy named policy to the incoming traffic of GigabitEthernet 1/0/1. [DeviceA] interface gigabitethernet 1/0/1 [DeviceA-GigabitEthernet1/0/1] qos apply policy policy inbound 53