HP 6125G HP 6125G & 6125G/XG Blade Switches ACL and QoS Configuration - Page 67

Create a behavior named, and con the action of redirecting traffic to the next hop

Page 67 highlights

[DeviceA-acl-basic-2000] rule permit source 2.1.1.1 0 [DeviceA-acl-basic-2000] quit # Create basic ACL 2001, and configure a rule to match packets with source IP address 2.1.1.2. [DeviceA] acl number 2001 [DeviceA-acl-basic-2001] rule permit source 2.1.1.2 0 [DeviceA-acl-basic-2001] quit # Create a class named classifier_1, and use ACL 2000 as the match criterion in the class. [DeviceA] traffic classifier classifier_1 [DeviceA-classifier-classifier_1] if-match acl 2000 [DeviceA-classifier-classifier_1] quit # Create a class named classifier_2, and use ACL 2001 as the match criterion in the class. [DeviceA] traffic classifier classifier_2 [DeviceA-classifier-classifier_2] if-match acl 2001 [DeviceA-classifier-classifier_2] quit # Create a behavior named behavior_1, and configure the action of redirecting traffic to the next hop 200.1.1.2. [DeviceA] traffic behavior behavior_1 [DeviceA-behavior-behavior_1] redirect next-hop 200.1.1.2 [DeviceA-behavior-behavior_1] quit # Create a behavior named behavior_2, and configure the action of redirecting traffic to the next hop 200.1.1.2. [DeviceA] traffic behavior behavior_2 [DeviceA-behavior-behavior_2] redirect next-hop 201.1.1.2 [DeviceA-behavior-behavior_2] quit # Create a policy named policy, associate class classifier_1 with behavior behavior_1, and associate class classifier_2 with behavior behavior_2 in the policy. [DeviceA] qos policy policy [DeviceA-qospolicy-policy] classifier classifier_1 behavior behavior_1 [DeviceA-qospolicy-policy] classifier classifier_2 behavior behavior_2 [DeviceA-qospolicy-policy] quit # Apply the policy named policy to the incoming traffic of GigabitEthernet 1/0/1. [DeviceA] interface gigabitethernet 1/0/1 [DeviceA-GigabitEthernet1/0/1] qos apply policy policy inbound 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84

61
[DeviceA-acl-basic-2000] rule permit source 2.1.1.1 0
[DeviceA-acl-basic-2000] quit
# Create basic ACL 2001, and configure a rule to match packets with source IP address 2.1.1.2.
[DeviceA] acl number 2001
[DeviceA-acl-basic-2001] rule permit source 2.1.1.2 0
[DeviceA-acl-basic-2001] quit
# Create a class named
classifier_1
, and use ACL 2000 as the match criterion in the class.
[DeviceA] traffic classifier classifier_1
[DeviceA-classifier-classifier_1] if-match acl 2000
[DeviceA-classifier-classifier_1] quit
# Create a class named
classifier_2
, and use ACL 2001 as the match criterion in the class.
[DeviceA] traffic classifier classifier_2
[DeviceA-classifier-classifier_2] if-match acl 2001
[DeviceA-classifier-classifier_2] quit
# Create a behavior named
behavior_1
, and configure the action of redirecting traffic to the next hop
200.1.1.2.
[DeviceA] traffic behavior behavior_1
[DeviceA-behavior-behavior_1] redirect next-hop 200.1.1.2
[DeviceA-behavior-behavior_1] quit
# Create a behavior named
behavior_2
, and configure the action of redirecting traffic to the next hop
200.1.1.2.
[DeviceA] traffic behavior behavior_2
[DeviceA-behavior-behavior_2] redirect next-hop 201.1.1.2
[DeviceA-behavior-behavior_2] quit
# Create a policy named
policy
, associate class
classifier_1
with behavior
behavior_1
, and associate
class
classifier_2
with behavior
behavior_2
in the policy.
[DeviceA] qos policy policy
[DeviceA-qospolicy-policy] classifier classifier_1 behavior behavior_1
[DeviceA-qospolicy-policy] classifier classifier_2 behavior behavior_2
[DeviceA-qospolicy-policy] quit
# Apply the policy named
policy
to the incoming traffic of GigabitEthernet 1/0/1.
[DeviceA] interface gigabitethernet 1/0/1
[DeviceA-GigabitEthernet1/0/1] qos apply policy policy inbound