HP Color LaserJet 4730 HP LaserJet MFP and Color MFP Products - Configuring Se - Page 51

Chapter 4: Settings List This section is a complete list of the settings recommended in this checklist. This section does not include instructions or explanations. It is meant as a check-off list of the recommended settings to help ensure that you complete the entire configuration. See the Network Security section (above) and the Ramifications section (below) for information on each setting. NOTE: This section lists recommended settings for reasonable security on the most common networks that include MFPs. MFPs configured according to this list are considered reasonably secure, but HP does not warrant or guarantee that this configuration prevents or limits networks from malicious attacks. CAUTION: Remember that these settings are recommended for the most common types of networks. Your network likely requires some configurations that are not recommended in this checklist. Consider each setting for your unique network. Recommended Settings Initial settings † Configure SNMPv3 (Security page). † Configure Bootloader password. † Configure ACL (Network page). † Disable Allow Web Server (HTTP) Access. Device Page Settings † Enable Job Retention. † Configure Job Hold Timeout. Fax Page Options † Configure Fax Printing. † Establish PIN Number. † Configure Enable Mode to Store All Received Faxes. Digital Sending Page Options † Configure Default From Address. † Select Prevent user from changing the Default From Address. † Configure Accessing LDAP Server settings (if available on your network). † Configure LDAP Server Bind Method to Simple over SSL (if possible). † Upload SSL Certificate (if available). HP LaserJet and Color LaserJet MFP Security Checklist 51