HP Designjet 510 HP Designjet 510 Printer series - User's Guide: English - Page 135
Enter, Cancel, Align printheads, at this stage or cancel the print.
View all HP Designjet 510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Front-panel messages Message Explanation and action Printheads not aligned Paper type not valid to align printheads Press ENTER to continue Printheads not aligned Paper too small to align printheads Press ENTER to continue PRINTHEADS not functional Replace printheads Cancel print Printheads require alignment. Load paper and select Align printheads. Press ENTER to finish Printheads require alignment. Press ENTER to align You have replaced one or more printheads but the printer has detected that you do not have the right type of paper loaded for the alignment process. Press the Enter key to load the correct type of paper, or the Cancel key to stop the load process. You have replaced one or more printheads but the printer has detected that you do not have wide enough paper loaded for the alignment process. Press the Enter key to load larger paper, or the Cancel key to stop the load process. The printer is attempting to print a job, but finds that there is a problem with the printheads. You may either replace the printheads at this stage or cancel the print. Select the required option and press the Enter key. If you decide to replace them, you will be told which ones are failing or missing. The printer has detected that the printheads need to be aligned. Press the Enter key to continue. Load a sheet or roll of paper, and select Align printheads from the Ink menu. See Printhead alignment. The printer has detected that the printheads need to be aligned. Press the Enter key to align them. See Printhead alignment.