HP Designjet 510 HP Designjet 510 Printer series - User's Guide: English - Page 85
Ink supply problems, Printhead problems after replacement, Problems inserting the ink cartridge - error codes
View all HP Designjet 510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Ink supply problems Most of the problems that you could encounter when working with HP ink supplies can be solved with guidance from the front panel. The only exception to this is the Unknown printhead error. A full list of front messages is supplied in Message descriptions. Printhead problems after replacement If, after replacing the printheads, the printer complains about wrong or missing printheads, perform the following steps: • Check that you have removed the protective tape from the printhead. • Insert the printhead into the carriage assembly, but this time close the cover using the latch. • Replace the printhead with a new one, see Printhead replacement. Problems inserting the ink cartridge 1. Make sure that you have the correct HP ink supplies ink cartridge. 2. Make sure that the cartridge is the correct color for that slot. 3. Make sure the cartridge is in the correct orientation, with the color-coded label at the top. Never clean inside the ink cartridge slots. Problems inserting the printhead 1. Make sure that you have the correct HP ink supplies printhead. 2. Make sure that the printhead is the correct color for that slot. 3. Make sure that the printhead is in the correct orientation. See Printhead replacement for further details.