HP Designjet 510 HP Designjet 510 Printer series - User's Guide: English - Page 64
Printhead replacement, Replace Printheads - will not start up
View all HP Designjet 510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Printhead replacement The graphical sequence shows how to replace a printhead in the printer. The front-panel menu selections are: Select (using the keys) Then press: 1. Ink 2. Replace Printheads Enter Enter Once you have replaced the printhead, if you have paper loaded, the printer prompts you to start the Printhead alignment procedure. If no paper is loaded the printer prompts you to load paper and then automatically starts the alignment. The alignment takes several minutes to complete and the printer will then prompt you to run the Color calibration procedure.
Printhead replacement
The
graphical sequence
shows how to replace a printhead in the printer.
The front-panel menu selections are:
Once you have replaced the printhead, if you have paper loaded, the printer prompts you to start the
Printhead
alignment
procedure. If no paper is loaded the printer prompts you to load paper and then automatically starts the
alignment. The alignment takes several minutes to complete and the printer will then prompt you to run the
Color
calibration
procedure.
Select (using the
keys)
Then press:
1.
Ink
Enter
2.
Replace Printheads
Enter