HP Designjet 510 HP Designjet 510 Printer series - User's Guide: English - Page 91

Form Feed and Cut, printer

Get HP Designjet 510 PDF manuals and user guides View all HP Designjet 510 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 91 highlights

11. Press the Form Feed and Cut key on the front panel to eject any small pieces of paper that are still in the paper path. 12. Reload the paper as normal (see Loading roll paper or Loading sheet paper). If you are using roll paper you may need to trim the edge first, to ensure that it is straight. NOTE: If there is still paper left in the paper path, try loading a sheet of stiff or rigid paper into the printer, such as heavyweight coated or matte film; this will help to force out any paper jammed in the paper path. 13. If the cutter seems to be causing the problem, check in Paper types that the type of paper is supported by the printer. Try disabling the cutter from the front panel; use → Cutter → Off. You are strongly recommended to align the printheads (see Printhead alignment) after clearing a paper jam, as the problem may have caused the printheads to be misaligned.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
11.
Press the
Form Feed and Cut
key on the front panel to eject any small pieces of paper that are still in the
paper path.
12. Reload the paper as normal (see
Loading roll paper
or
Loading sheet paper
). If you are using roll paper you
may need to trim the edge first, to ensure that it is straight.
NOTE:
If there is still paper left in the paper path, try loading a sheet of stiff or rigid paper into the
printer, such as heavyweight coated or matte film; this will help to force out any paper jammed
in the paper path.
13. If the cutter seems to be causing the problem, check in
Paper types
that the type of paper is supported by the
printer. Try disabling the cutter from the front panel; use
→
Cutter
→
Off
.
You are strongly recommended to align the printheads (see
Printhead alignment
) after clearing a paper jam, as
the problem may have caused the printheads to be misaligned.