HP Designjet T770 HP Designjet T770 & T1200 Printer series - Users Guide - Page 75

Printing ● Load two rolls of paper suitable for your jobs. If the printer finishes one roll, it will automatically switch to the other. ● Check that you have paper wide enough to print all of your jobs. Any jobs that are too wide may be put "on hold for paper" if the paper mismatch action is set to Put job on hold (see Paper mismatch action on page 22). ● Check the ink levels remaining in your ink cartridges. ● When you have submitted your print jobs, you can use the Embedded Web Server from a remote location to monitor their status. ● Drying time should be set to Optimal. ● Select the Setup menu icon , then Printing preferences > Paper options > Roll switching options > Minimize roll changes or Use roll with less paper. We recommend the following settings, depending on the paper type and what kind of prints you are making. Table 7-1 Recommended settings for unattended printing Print type Print mode MaxDetail Optimized for Drying time Paper types Lines Normal Off Lines Optimal Coated, Bond, Heavyweight Coated, Glossy Lines and fills Normal On Lines Optimal Coated, Bond, Heavyweight Coated, Glossy Maps Best On Images Optimal Coated, Heavyweight Coated, Glossy Renderings, Best On photographs Images Optimal Coated, Heavyweight Coated, Glossy ENWW Unattended printing/overnight printing (T1200 series only) 67