HP LaserJet 1100 Service Manual - Page 141
High-voltage power supply check
View all HP LaserJet 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
NOTE: High-voltage power supply check The high-voltage power supply PCA provides the necessary voltages for the electrophotographic processes. Checking the toner cartridge connection points Visually inspect the three connection points on the underside, right end of the toner cartridge: charging (callout 1), drum ground (callout 2), and developing roller (callout 3). If they are dirty or corroded, clean the connections, or, if they are damaged, replace the toner cartridge. Use only alcohol to clean the connections. Figure 5-5 Toner cartridge high-voltage connection points Checking the high-voltage connector assembly The assembly uses three spring-loaded pins to contact the toner cartridge: charging (callout 1), drum ground (callout 2), and developing roller (callout 3). Verify that the pins are not dirty or corroded and that the spring-loading action is functional. If the pins are dirty, clean them using alcohol only. If they are damaged, replace the high voltage connector assembly. 146 Troubleshooting/Maintenance C4224-90962