HP LaserJet 1100 Service Manual - Page 26
Table 2-1. Control panel light messages, Light status, Condition of the printer, Action - error lights
View all HP LaserJet 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Table 2-1. Control panel light messages Light status Condition of the printer Action PowerSave mode (or the printer is off) The printer uses PowerSave mode to conserve energy. Low power consumption mode. Pressing the Go key on the printer control panel or printing will awaken the printer from PowerSave mode. Check the power cord if the above actions do not generate a response (and the power switch if your printer is powered with 220-240 volts). Ready The printer is ready to print. No action is necessary; however, if you press and release the Go key on the printer control panel, a self-test page will print. Processing Self test page Form Feed The printer is receiving or processing data. Wait for the job to print. Buffered data Press and release the Go key on the printer control panel to print the remaining data. The printer memory is retaining unprinted data. A file has been sent to the printer that does not contain a from feed at the end. Manual feed Check that you have loaded the correct paper, then press and release the Go key on The printer is in manual feed the printer's Control Panel to print. Manual mode. The printer is waiting for feed is controlled by the software. If you do a different size sheet of paper to not want to be in manual feed mode, change be placed in the Single Sheet the setting in your printer properties. Input Slot or Paper Input Bin. Door open, no Toner Cartridge, Check the following: or paper jam q The printer door is closed. The printer is in an error state. q The Toner Cartridge is correctly installed in the printer. q There are no paper jams. Paper out The printer is out of paper. Load paper into the printer. C4224-90962 HP LaserJet 1100 Printer control panel 27