HP LaserJet 1100 Service Manual - Page 55
Basic sequence of operation formatter to printer - connector
View all HP LaserJet 1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Basic sequence of operation (formatter to printer) The formatter and the ECU share information during printer operation. The ECU-to-formatter connector (J201) forms a link that operates as a serial data bus. This allows printer status, command information, and dot-image data to be passed between the two. The following events take place during normal printer operation: Period Purpose Remarks WAIT To clear the drum surface of Detects whether the cartridge is installed or From the power-ON until the end of potential and to clean the transfer not. the main motor initial rotation. charging roller. STBY To keep the printer ready to print. (Standby) From the end of the WAIT period or the LSTR period until the pick-up command is input from the video controller. Or, from the end of the LSTR period until power-OFF. INTR To stabilize the photosensitive Initial Rotation Period drum sensitivity in preparation for After the pick-up command has printing. Also to clean the transfer been input from the video controller charging roller. until the paper reaches the paper top sensor. PRINT To form images on the (Print) photosensitive drum based on the From the end of the initial rotation VIDEO signals (/VDO, VDO) input until the primary voltage goes OFF. from the video controller and to transfer the toner image onto the paper. LSTR To delivery the last page. Also to (Last Rotation Period) clean the transfer charging roller. After the primary voltage goes OFF until the main motor stops rotating. When the pick-up command is input from the video controller, the printer enters the INTR period immediately after the end of the LSTR period. 58 Functional Overview C4224-90962