HP StorageWorks 1606 Brocade Fabric OS Troubleshooting and Diagnostics Guide v - Page 55
FirmwareDownload Errors, In this Blade troubleshooting tips
View all HP StorageWorks 1606 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
FirmwareDownload Errors Chapter 5 In this chapter •Blade troubleshooting tips 41 •Firmware download issues 42 •Troubleshooting firmwareDownload 44 •USB error handling 45 •Considerations for downgrading firmware 45 Blade troubleshooting tips This chapter refers to the following specific types of blades inserted into either the Brocade 48000 director or Brocade DCX or DCX-4S enterprise-class platform: • FC blades or port blades contain only Fibre Channel ports: Brocade FC4-16/32/48, FC10-6, and FC8-16/32/48. • AP blades contain extra processors and some have specialized ports: Brocade FR4-18i, FC4-16IP, FA4-18, FCOE10-24, and FX8-24. • CP blades have a control processor (CP) used to control the entire switch; they can be inserted only into slots 5 and 6 on the Brocade 48000, slots 6 and 7 on the Brocade DCX, and slots 4 and 5 on the Brocade DCX-4S. • CORE8 and CR4S-8 core blades provide ICL functionality between two Brocade DCX Backbones. CORE8 blades can be inserted only into slots 5 and 8 on the Brocade DCX. CR4S-8 blades can be inserted only into slots 3 and 6 on the Brocade DCX-4S. Typically, issues detected during firmware download to AP blades do not require recovery actions on your part. If you experience frequent failovers between CPs that have different versions of firmware, then you may notice multiple blade firmware downloads and a longer startup time. ATTENTION Brocade DCX Director with FC8-16/32/48 blades: If you are running Fabric v6.1.0, then you cannot downgrade to pre-Fabric OS v6.0.0 versions as they are not supported on this director. Symptom Relocation of internal image times out on CP8 core blade. Probable cause and recommended action This can be caused by issues in the co-CPU. If this happens, the firmware download process synchronizes the partitions in the main-CPU and co-CPU by starting a firmware commit operation. Wait at least 15 minutes for the commit operation to complete, issue the firmwareShow command to verify the partitions are synchronized, and reissue the firmwareDownload command. If the problem persists, you will need to contact the switch service provider. Fabric OS Troubleshoot and Diagnostics Guide 41 53-1001340-01